British Standard Nickel Plated Carbon Steel Roller Chains
Enquire about British Standard Nickel Plated Carbon Steel Roller Chains
Description
Nickel Plated Carbon Steel Roller Chains to Din8187.
Listed here is the B.S.Short Pitch Series of Roller Chains that conform to ISO 606r/Din 8187 from one particular manufacturer that can be supplied Nickel Plated. The Plating process having been applied prior too assembly to ensure maximum protection of all the component parts.
Beside these chains and this manufacturer, the company have a number of others that offer a Plating Service for most of there production ranges although they may be subject to a minimum production quality.
Therefore if you are looking for a Nickel Plated Chain other than what is listed here, please contact the Sales Department with your requirement.
Precision Roller Chains: as the company offer a combined range, that is produced by a number manufacturers from Europe and Japan, they have adopted the following Quality Standards :-
- All chains have been produced in plant that is Certified to ISO9001.
- Chains covered by the ISO606R Standard, will conform to this Standard of Specification and Quality.
- For chains not covered by ISO606R, then we have adopted the appropriate Din 8187 or Din 8188 or Ansi B 29.1 of Specification and Quality Standard.
- Work standard chains not covered by the above standards will conform to the appropriate Manufacturer’s Standard.
Range of Sizes
Note: We are continuously adding to or Extending our Ranges, hence if you cannot find it listed here, then please contact us via the ENQUIRY link on each page.
Pitch Size | Simplex ISO Ref | Duplex ISO Ref | Triplex Iso Ref |
---|---|---|---|
6mm | N04B1 | N04B2 | N04B3 |
8mm | N05B1 | N05B2 | N05B3 |
3/8'' | N06B1 | N06B2 | N06B3 |
1/2'' | N08B1 | N08B2 | N08B3 |
5/8'' | B10B1 | N10B2 | N10B3 |
3/4'' | N12B1 | N12B2 | N12B3 |
1'' | N16B1 | N16B2 | N16B3 |
1,1/4'' | N20B1 | N20B2 | N20B3 |
1,1/2'' | N24B1 | N24B2 | N24B3 |
1,3/4'' | N28B1 | N28B2 | N28B3 |
2'' | N32B1 | N32B2 | N32B3 |
Parts & Tools
Connecting Links:-Sizes up to & inclusive of 1”Pitch(16B) are available in SPRING CLIP TYPE and for Size 1”Pitch(16B) & above would COTTERED or SPLIT PIN TYPE
Offset/Crank Link: Single pitch type only
Chain Breakers: 3/8″ to 3/4″ & 3/4″ to 1-1/4″
Attachments
Standard Types are:
- Extended Plain Pins One side or Both. (These can be on every pin or at intervals along a supply length)
- Extended Grooved Pin One side or Both (These can be on every pin or at intervals along a supply length)
Attachments Side Plates:
- K1 Bent with One Fixing Hole on One side or Both.
- K2 Bent with Two Fixing Holes on One side or Both.
- M1 Vertically Straight with One Fixing
- M2 Vertically Straight with Two Fxing Holes on One side or Both.
(above can be on Inner or Outers Plate links or every plate or intervals along the supply length)
Other types being available upon request see our Attachment Page
Sourcing Service
If you cannot find the Chain you are looking for or you have a reference not listed here then in the first instance, please review our CROSS REFERENCE LISTING page or if you still cannot find what you are looking for then ask our Sales office by utilising the ENQUIRY button.
Tips
Plated Chains can be supplied in two formats:
All parts Plated before Assembly – which offer the full protection of the plating! or after assembly usually cheaper but they do not provide Full protection (This type should only be considered for cosmetic reasons only)
You might also be interested in…
-
British Standard Simplex Sprockets Carbon Steel Pilot Bore
-
British Standard Simplex Shaft Ready Sprockets (Metric Bores – With Induction Harden Teeth)
-
British Standard Simplex & Duplex Sprockets Pilot Bore & Simplex Taper Bored/Bushed with Induction Harden Teeth
-
British Standard Simplex, Duplex and Triplex Taper Bored Sprockets
-
British Standard Simplex Reverse Taper Bored/Bushed Sprockets
-
British Standard Duplex Sprockets in Carbon Steel Pilot Bore
-
British Standard Triplex Sprockets in Carbon Steel Pilot Bore
-
British Standard Simplex Plate Wheels Carbon Steel Pilot Bore
-
British Standard Duplex Plate Wheels in Carbon Steel Pilot Bore
-
British Standard Triplex Plate Wheels in Carbon Steel Pilot Bore
-
PE-UHMW Plastic Wear Guides for Roller Chains
-
Automatic Tensioning Arms & Boxes for Roller Chain, Vee Belt, Poly Vee Belt & Flat Timing Belt