British Standard Simplex Sprockets Carbon Steel Pilot Bore

Enquire about this product

Enquire about British Standard Simplex Sprockets Carbon Steel Pilot Bore

Name *
Email *
Phone
Message

If you want to know more about the way this site handles your data, then please read our privacy policy.

Description

This Extensive Stock Range of Sprockets are to suit Roller Chains that conform to BS228, Din 8187 and the ISO 606R Standards. The dimensions are too the Metric European series which have been commonly adopted throughout Europe and are in Carbon Steel. The Tooth range can be extended further by utilizing the larger Stock Range of Plate wheels, although these do not have a boss, they can be supplied with a weld on a boss if required.

With further Sizes and alternative design types being provided through the company’s own UK Manufacturing Service enabling it to provide a one stop service regardless of whether you require a one-off special, a prototype or small volume repeat business, it can even cater for large volume repeat business from its competitive European manufacturing partners in Italy.

Looking for a None Stock Tooth Size?

  1. Then check to see if it is listed as a Plate wheel as any plate wheel can be supplied as a sprockets by Welding on a Boss.
  2. Alternatively the company provides a Manufacturing Service for any none Standard tooth size not in the Standard tooth range.

Need Heavy Duty Castings?

Heavy Duty castings for applications where Impact loads are common or when increase strength is required, then please ask our Sales Department for details of our Heavy Duty Casting range in GG25 or our Casting Service when you require an Oversize Boss or you have a Special Pattern requirement such as a Shear Pin or Split Designs.

As a rough guide we would recommend that any boss diameter should be at least 1.5 times the shaft diameter it is required to fit onto.

Range of Sizes

Note: We are continuously adding to or Extending our Ranges, hence if you cannot find it listed here, then please contact us via the ENQUIRY link on each page.

Tooth sizes in C45 Steel and are suitable for Flame Hardening – Cast Iron are in Grade GJL200 as Standard with Increased Boss Diameter & Heavy Duty Grades available on request

Alternative Design Types

We have a range of alternative design types available :-

  • Weld on Boss Type
  • Weld in through Boss Type
  • Double Central Boss Type
  • Double Offset Boss Type
  • Idler Sprockets (with Bearing)
  • Larger Boss Diameter Type
  • Longer boss length Type

View alternative range.

 

Alt. Shaft Fixing

As an alternative to either Boring & Keywaying a pilot bore sprocket or using a Taper bored sprocket and Bush. Why not take a look at the range of Locking Bushes we now offer, as they eliminate the need for fixing via a Keyway-Key thereby providing the added benefit of a uniform distribution of the drive load over the entire diameter of the bush.

View Range

Reworking Service

To compliment the Stock range of Products the company offers a comprehensive reworking service to modify any stock sprocket to your individual requirements.

Heat Treatments

  • FLAME HARDEN TEETH – Without Certificate
  • INDUCTION HARDEN TEETH – With Certificate
  • CASE HARDENING – With or Without Certificate

Plating Service

A Full range of add on Plating Finishes is available :-

  • Zinc (Clear & Yellow)
  • Nickel
  • Chemically Black Phosphate
  • Hard Anodising for Aluminium Products!

 

Manufacturing

Beside the Reworking Service the company offers a Full Manufacturing Service that caters for :-

  • Any requirement outside the stock range.
  • Customers own drawing requirement.
  • When a stock sprocket is not suitable.

View our manufacturing Capacity  

Tips

Read our introduction to Roller Chain Sprockets including how to identify and other userful informaiton.

You might also be interested in…