Flexible Spider Cast Iron Taper Bore for Taper Bush Fitting

Enquire about this product

Enquire about Flexible Spider Cast Iron Taper Bore for Taper Bush Fitting

Name *
Email *
Phone
Message

If you want to know more about the way this site handles your data, then please read our privacy policy.

Description

This Taper Bored type of Flexible Spider Couplings are again similar to the Rotex, Giflex FBX and KTR ranges and are available in six stock sizes and cater for shafts size from 9.0mm to 60.0mm, and provide a Torque range of 95nm to 2930nm.

There are again three types of Polyurethane Spiders, Yellow 92 Shore, Black 94 Shore (Standard supply type unless otherwise requested) and Red 98 Shore, with the red providing an increase Torque loading capacity and are suitable for application with an ambient temperatures of -40°c to +125°c and for shorts peak load up to +150°C.

There are two hub types, the E type allows the taper bush to fit in from the external side of the hub, with the I Type allowing the taper bush to fit in from the internal side of the hub, these can be mixed and matched to suit customer preferred assembly arrangments.

Additional information

Material

Cast Iron Grade GG25

E Hub Type

Bush fits in outside face of hub.

I Hub Type

Bush fits in inside of face hub.

Torque Capacity

95-2930nm

Ambient Temp

-40c to +125c

Peak Temp

150C

Polyurethane Spiders

Black 94 Shore, Red 98 Shore, Yellow 92

Range of Sizes

Coupling Ref. E Hub Type. Bush Size & Shaft Range Min-Max (mm) I Hub Type. Bush Size & Shaft Range Min-Max (mm)
T2838 1108, 9-28 1108, 9-28
T3845 1108, 9-28 1108, 9-28
T4255 1610, 12-42 1610, 12-42
T4860 1615, 12-42 1615, 12-42
T5570 2012, 14-50 2012, 14-50
T7590 2157, 16-60 2157, 16-60

Free Drive Design

A Free Design selection service is available for this product for full details and application requirements please follow this link.

 

Reworking Service

To compliment this range of Drive Couplings the company can also provide a variety of finishing services, to suit individual customer’s own requirements, and briefly include :-

  • Boring
  • Keywaying
  • Broaching
  • Drill & Tapping
  • Wire Eroding

Plating Service

A Full range of add on Plating Finishes is available :-

  • Zinc (Clear & Yellow)
  • Nickel
  • Chemically Black Phosphate
  • Hard Anodising for Aluminium Products!

Tips

Tips

Be careful if you are only trying to replace just a hub or a spider as there are numerious Brands such as the Giflex, Rotex, KTR & FBX which are dimensional very similar but are not interchangeable? Therefore close attention need to be paid to the pitch of the spider as the can differ slightly? If in doubt replace the complete coupling!

You might also be interested in…