Timing Pulleys: HTD Pitch Size 5M Pilot Bore
Enquire about Timing Pulleys: HTD Pitch Size 5M Pilot Bore
- Description
- Range of Sizes
- Alt. Shaft Fixing
- Drive Design Service
- Plating Service
- Reworking Service
- Manufacturing
- Tips
Description
Listed here is our current standard stock range of pilot bore Pulleys and Bars to suit HTD 5M pitch of Timing Belts.
The standard stock range of pulleys are available in nineteen tooth sizes to suit three standard belt width of 09 (9mm), 15 (15mm) and 25 (25mm) which should cater for the majority of power transmission drive applications. Although you can also generate a pulley for any alternative width or for a non-standard tooth size pulley by selecting a bar length from one of the range of thirty-seven tooth sizes we offer.
Alternatively, if you can not find the tooth size you are looking for here. The company does also provides a full manufacturing service to suit any customer’s individual requirement, see our timing pulley manufacturing page for full details.
Range of Sizes
Timing Pulleys: with boss one side
Pulleys No of Teeth | For Belt Width 09 (9mm) | For Belt Width 15 (15mm) | For Belt Width 25 (25mm) |
---|---|---|---|
12T | 5M-09 | 5M-15 | 5M-25 |
14T | 5M-09 | 5M-15 | 5M-25 |
15T | 5M-09 | 5M-15 | 5M-25 |
16T | 5M-09 | 5M-15 | 5M-25 |
18T | 5M-09 | 5M-15 | 5M-25 |
20T | 5M-09 | 5M-15 | 5M-25 |
21T | 5M-09 | 5M-15 | 5M-25 |
22T | 5M-09 | 5M-15 | 5M-25 |
24T | 5M-09 | 5M-15 | 5M-25 |
26T | 5M-09 | 5M-15 | 5M-25 |
28T | 5M-09 | 5M-15 | 5M-25 |
30T | 5M-09 | 5M-15 | 5M-25 |
32T | 5M-09 | 5M-15 | 5M-25 |
36T | 5M-09 | 5M-15 | 5M-25 |
40T | 5M-09 | 5M-15 | 5M-25 |
44T | 5M-09 | 5M-15 | 5M-25 |
48T | 5M-09 | 5M-15 | 5M-25 |
60T | 5M-09 | 5M-15 | 5M-25 |
72T | 5M-09 | 5M-15 | 5M-25 |
Timing Bars:
Bars No of Teeth | Useable Length mm |
---|---|
12T | 150 |
13T | 150 |
14T | 175 |
15T | 175 |
16T | 175 |
17T | 175 |
18T | 200 |
19T | 200 |
20T | 200 |
21T | 200 |
22T | 200 |
23T | 200 |
24T | 200 |
25T | 200 |
26T | 200 |
27T | 200 |
28T | 200 |
29T | 200 |
30T | 200 |
31T | 200 |
32T | 200 |
33T | 200 |
34T | 200 |
35T | 200 |
36T | 200 |
38T | 200 |
40T | 200 |
42T | 200 |
44T | 200 |
45T | 200 |
46T | 200 |
48T | 200 |
50T | 200 |
54T | 200 |
60T | 200 |
62T | 200 |
72T | 200 |
Alt. Shaft Fixing
As an alternative to either Boring & Keywaying a pilot bore pulley or using a Taper bored pulley and Bush. Why not take a look at the range of Locking Bushes we now offer, as they eliminate the need for fixing via a Keyway-Key thereby providing the added benefit of a uniform distribution of the drive load over the entire diameter of the bush.
Drive Design Service
Plating Service
A Full range of add on Plating Finishes is available :-
- Zinc (Clear & Yellow)
- Nickel
- Chemically Black Phosphate
- Hard Anodising for Aluminium Products!
Reworking Service
To compliment this range of stock products the company can also provide a variety of finishing services, to suit individual customer’s own requirements.
Manufacturing
The company also provides a Manufacturing Service that caters for :-
- Any requirement outside it’s stock ranges.
- Customers own drawing requirement.
- Or when a stock pulley is not suitable.
Tips
Note: Only one pulley’ within a timing pulley drive needs to have Flanges to stop belt run off.