Timing Pulleys & Bars: Metric Pitch T10 Pilot Bore
Enquire about Timing Pulleys & Bars: Metric Pitch T10 Pilot Bore
- Description
- Range of Sizes
- Alt. Shaft Fixing
- Drive Design Service
- Plating Service
- Reworking Service
- Manufacturing
- Tips
Description
Listed here is our current standard stock range of pilot bore Pulleys and Bars to suit Metric Pitch T10 Timing belts.
The standard stock range of pulleys are available in 20 tooth sizes to suit 4 standard belt widths of 16 (16mm), 25 (25mm), 32 (32mm) and 50 (50mm). Although you can also generate a pulley for any alternative width or for a non-standard tooth size by selecting a bar length from one of the range of 28 tooth sizes we offer.
Alternatively if you can not find the tooth size you are looking for here. The company does also provides a full manufacturing service to suit any customer’s individual requirement, see our timing pulley manufacturing page for full details.
Range of Sizes
Timing Pulleys: with boss one side
Pulleys No of Teeth | Belt Width 16mm | Belt Width 25mm | Belt Width 32mm | Belt Width 50mm |
---|---|---|---|---|
12T | T10-16 | T10-25 | ||
14T | T10-16 | T10-25 | ||
15T | T10-16 | T10-25 | ||
16T | T10-16 | T10-25 | ||
18T | T10-16 | T10-25 | T10-32 | T10-50 |
19T | T10-16 | T10-25 | T10-32 | T10-50 |
20T | T10-16 | T10-25 | T10-32 | T10-50 |
22T | T10-16 | T10-25 | T10-32 | T10-50 |
24T | T10-16 | T10-25 | T10-32 | T10-50 |
25T | T10-16 | T10-25 | T10-32 | T10-50 |
26T | T10-16 | T10-25 | T10-32 | T10-50 |
27T | T10-16 | T10-25 | T10-32 | T10-50 |
28T | T10-16 | T10-25 | T10-32 | T10-50 |
30T | T10-16 | T10-25 | T10-32 | T10-50 |
32T | T10-16 | T10-25 | T10-32 | T10-50 |
36T | T10-16 | T10-25 | T10-32 | T10-50 |
40T | T10-16 | T10-25 | T10-32 | T10-50 |
44T | T10-16 | T10-25 | T10-32 | T10-50 |
48T | T10-16 | T10-25 | T10-32 | T10-50 |
60T | T10-16 | T10-25 | T10-32 | T10-50 |
Material Pulleys: Aluminium 6082 T6 UNI 9006/4, with Flanges up to & including 40 Tooth, without Flanges 44 tooth & above
Timing Bars:
Bars No of Teeth | Useable Length mm |
---|---|
10T | 140 |
11T | 140 |
12T | 140 |
13T | 140 |
14T | 160 |
15T | 160 |
16T | 160 |
17T | 160 |
18T | 160 |
19T | 160 |
20T | 160 |
21T | 160 |
22T | 160 |
23T | 160 |
24T | 160 |
26T | 160 |
28T | 160 |
30T | 160 |
32T | 160 |
34T | 160 |
36T | 160 |
38T | 160 |
40T | 160 |
44T | 160 |
45T | 160 |
48T | 160 |
60T | 160 |
72T | 160 |
Material Bars: Aluminium 6082 T6 UNI 9006/4
Alt. Shaft Fixing
As an alternative to either Boring & Keywaying a pilot bore pulley or using a Taper bored pulley and Bush. Why not take a look at the range of Locking Bushes we now offer, as they eliminate the need for fixing via a Keyway-Key thereby providing the added benefit of a uniform distribution of the drive load over the entire diameter of the bush.
Drive Design Service
Plating Service
A Full range of add on Plating Finishes is available :-
- Zinc (Clear & Yellow)
- Nickel
- Chemically Black Phosphate
- Hard Anodising for Aluminium Products!
Reworking Service
To compliment this range of stock products the company can also provide a variety of finishing services, to suit individual customer’s own requirements.
Manufacturing
The company also provides a Manufacturing Service that caters for :-
- Any requirement outside it’s stock ranges.
- Customers own drawing requirement.
- Or when a stock pulley is not suitable.
Tips
Note: Only one pulley’ within a timing pulley drive needs to have Flanges to stop belt run off.
You might also be interested in…
-
Automatic Tensioning Arms & Boxes for Roller Chain, Vee Belt, Poly Vee Belt & Flat Timing Belt
-
Timing Single/Double Sided Belts, Sleeves & Belting Metric T10 Pitch Series
-
Clamping Plates Metric Pitch for T5, T10, AT5 & AT10
-
Motor Slide Rails & Bases for Tensioning Drives
-
Locking Bushes (Friction, Clamping, Torque)