American Standard Nickel Plated Carbon Steel Roller Chains

American Standard Nickel Plated Carbon Steel Roller Chains

Enquire about this product

Enquire about American Standard Nickel Plated Carbon Steel Roller Chains

Name *
Email *
Phone
Message

If you want to know more about the way this site handles your data, then please read our privacy policy.

Categories: , ,

Description

Nickel Plated Roller Chains to ANSI B 29.1/Din 8188 Standards

These are the main sizes of Chains that can be supplied Nickel plated although not all, as some of our manufacturing partners offer a plating service on most of the chains they produce subject to a minimum production quantity.

So if you can not find what you are looking for here please contact or Sales Department with your requirement.

Precision Roller Chains: as the company offers a combined range, that is produced by a number manufacturers from around the World, it has adopted the following Quality Standards :-

  • All chains have been produced in plant that is Certified to ISO 9001.
  • Chains covered by the ISO 606R Standard, will conform to this Standard of Specification and Quality.
  • For chains not covered by ISO 606R, then we have adopted the appropriate Din 8187 or Din 8188 or Ansi B 29.1 of Specification and Quality Standard.
  • Work standard chains not covered by the above standards will conform to the appropriate Manufacturer’s Standard.

Range of Sizes

Note: We are continuously adding to or Extending our Ranges, hence if you cannot find it listed here, then please contact us via the ENQUIRY link on each page.


Only listed here are the base designations for these chains, although there is a number of prefixes that designate the different types! 

 

Supply Size

Std Box length: 5meters, 10Ft

Cut lengths: to order

Parts & Tools

Connecting Links:-Sizes up to & inclusive of 1”Pitch(16B) are available in SPRING CLIP TYPE and for Size 1”Pitch(16B) & above would COTTERED or SPLIT PIN TYPE.

Offset/Crank Link: Single Pitch type only

Chain Breaker: 3/8″ to 3/4″ & 3/4″ to 1 1/4″

Attachments

Standard Types are:

  • Extended Plain Pins One side or Both. (These can be on every pin or at intervals along a supply length)
  • Extended Grooved Pin One side or Both (These can be on every pin or at intervals along a supply length)

Attachments Side Plates:

  • K1 Bent with One Fixing Hole on One side or Both.
  • K2 Bent with Two Fixing Holes on One side or Both.
  • M1 Vertically Straight with One Fixing
  • M2 Vertically Straight with Two Fxing Holes on One side or Both.

(above can be on Inner or Outers Plate links or every plate or intervals along the supply length)

Other types being available upon request see our Attachment Page

Alternative Materials

View our range of Range of Sizesial Profiles. View our Stainless Steel range.

Sourcing Service

If you cannot find the Chain you are looking for or you have a reference not listed here then in the first instance, please review our CROSS REFERENCE LISTING page or if you still cannot find what you are looking for then ask our Sales office by utilising the ENQUIRY button.

Tips

Plated Chains can be supplied in two formats: All parts Plated before Assembly – which offer the full protection of the plating or after assembly usually cheaper but they do not provide Full protection (This type should only be considered for cosmetic reasons only)

Be Careful when replacing drive wheel for the C2040, C2050, C2060, C2080 & C2100 chains, as well as drive wheel cut to the correct Pitch Size. It is also possible to use the Shorter Pitch Standard Ansi Sprockets by driving off every other tooth, however we would strongly recommend that you obtain the Outside Diameter and number of teeth to confirm which type is fitted.

You might also be interested in…