These Giflex Back-lash free Flexible Spider Couplings
are similar to the KTR range and are available in six
stock sizes and cater for shafts size from 5.0mm to
40.0mm,and provide a Torque range of 18nm to
3250nm.
There are three types of Polyurethane
Spiders, Blue 80Shore, Yellow 92 Shore and Red 98
Shore, with the red providing an increase Torque loading
capacity and are suitable for application with an ambient
temperatures of -40c to +125c and for shorts peak
load up to +150C. The Hubs are split so as to form
a clamp, and once locked down take out any surplus
play within the fitting and can be supplied as a nomianl
pilot type for finish machining to customer own shaft
requirements or for volume user they can be ordered pre-machined to suit a range of shaft sizes, for full details please ask our Sales Department?
A Free Design selection service is available for this product for full details and application requirements please use the link below?
Lakehurstpt
lakehurstpt_update160009.gif
lakehurstpt_update160008.jpg
lakehurstpt_update160007.gif
Welcome to the Specialist Supplier & Manufacturer to the Power Transmission Drives Industry
lakehurstpt_update160006.gif
Home -
About Us -
Services -
Contact -
News -
lakehurstpt_update160005.gif
Copyright remains the property of Lakehurst Limited
Back to Shaft Coupling Products Index Page -
lakehurstpt_update160004.jpg
lakehurstpt_update160003.jpg
Information Bar :-
This New feature is there to provide useful links to other pages, further information and Tips you may find of interest?
lakehurstpt_update160002.jpg
Drive Design Service:
-> A Free Drive Selection Service is available upon request, please click on this link to go to our Drive Selection Service Page for details!
Reworking Service:
To compliment the Stock range of Products the company offers an in house comprehensive reworking service to modify any stock Gear to suit your individual requirements?
Plating Services:
A Full range of add on Plating Finishes is available:
Zinc (Clear & Yellow) Nickel
Chemically Black Phosiphate as well as Hard Andosing for Aluminium Products!
Tips:
Be careful if you are only trying to replace just a hub or a spider as there are numerious Brands such as the Giflex, Rotex, KTR & FBX which are dimensional very similar but are not interchangeable? Therefore close attention need to be paid to the pitch of the spider as the can differ slightly? If in doubt replace the complete coupling!
Links to Related Products:
-> CR Type Roller Chain Shaft Couplings Pilot bore
-> HRC Type Flexible Couplings Pilot Bore & Taper Bored
-> Polymer Sleeve Couplings with short & long Hubs Pilot Bore
-> Flexible Spider Couplings in Aluminium -Steel -Cast Iron Pilot Bore
-> Locking Bushes
-> Giflex Internal Gear Couplings with Steel Sleeves Pilot Bore
-> Flexible Spider Couplings in Cast Iron Taper Bored
Coupling
Ref:
Plain Bore
Size mm
Available
Pre- Bored
Size Range mm
GE-T09SG  4.0 
5.0/6.0/8.0/10.0
GE-T14SG  4.0
5.0/6.0/8.0/10.0
12.0/14.0/15.0/16.0
GE-T19/24SG 8.0
8.0/10.0/12.0/14.0/15.0/16.0
18.0/19.0/20.0
GE-T24/28SG 14.0
12.0/14.0/15.0/16.0/18.0/19.0
20.0/22.0/24.0/25.0/28.0
GE-T28/38SG 19.0
18.0/19.0/20.0/22.0/24.0/25.0
28.0/30.0/32.0/35.0
GE-T38/45SG 20.0
18.0/19.0/20.0/22.0/24.0/25.0
28.0/30.0/32.0/35.0/38.0/40.0
Material: Aluminium
lakehurstpt_update160001.jpg
UK -Tel: (44) 0121 555 6777 Fax: (44) 0121 555 6779