This Taper Bored type of Flexible Spider Couplings
are again similar to the Rotex, Giflex FBX and KTR
ranges and are available in six stock sizes and
cater for shafts size from 9.0mm to 60.0mm,and
provide a Torque range of 95nm to 2930nm.
are again three types of Polyurethane Spiders,Yellow
92Shore, Black 94 Shore (Standard supply type
unless otherwise requested) and Red 98 Shore, with
the red providing an increase Torque loading capacity
and are suitable for application with an ambient
temperatures of -40c to +125c and for shorts peak
load up to +150C. There are two hub types, the E
type allows the taper bush to fit in from the external
side of the hub, with the I type allowing the taper bush to fit in from the internal side of the hub, these can be mixed and matched to suit customer preffered assembly arrangments?
A Free Design selection service is available for this product for full details and application requirements please use the link below?
Welcome to the Specialist Supplier & Manufacturer to the Power Transmission Drives Industry
Home -
About Us -
Services -
Contact -
News -
Copyright remains the property of Lakehurst Limited
Back to Shaft Coupling Products Index Page -
Information Bar :-
This New feature is there to provide useful links to other pages, further information and Tips you may find of interest?
Drive Design Service:
-> A Free Drive Selection Service is available upon request, please click on this link to go to our Drive Selection Service Page for details!
Reworking Service:
To compliment the Stock range of Products the company offers an in house comprehensive reworking service to modify any stock Gear to suit your individual requirements?
Plating Services:
A Full range of add on Plating Finishes is available:
Zinc (Clear & Yellow) Nickel
Chemically Black Phosiphate as well as Hard Andosing for Aluminium Products!
Be careful if you are only trying to replace just a hub or a spider as there are numerious Brands such as the Giflex, Rotex, KTR & FBX which are dimensional very similar but are not interchangeable? Therefore close attention need to be paid to the pitch of the spider as the can differ slightly? If in doubt replace the complete coupling!
Links to Related Products:
-> CR Type Roller Chain Shaft Couplings Pilot bore
-> HRC Type Flexible Couplings Pilot Bore & Taper Bored
-> Polymer Sleeve Couplings with short & long Hubs Pilot Bore
-> Flexible Spider Couplings in Aluminium -Steel -Cast Iron Pilot Bore
->Spider Couplings Anti-backlash Type Pilot Bore
-> Taper Bushes
Pilot Bore Range is also available see the link below to access the page?
E Hub Type
(Bush fits in outside
face of hub)
Bush Size & Shaft 
Range Min to Max mm
I Hub Type
(Bush fits in Inside
face of hub)
Bush Size & Shaft
Range Min to Max mm
1108 Bush
9.0 to 28.0
1108 Bush
9.0 to 28.0
1108 Bush
9.0 to 28.0
1108 Bush
9.0 to 28.0
1610 Bush
12.0 to 42.0
1610 Bush
12.0 to 42.0
1615 Bush
12.0 to 42.0
1615 Bush
12.0 to 42.0
2012 Bush
14.0 to 50.0
2012 Bush
14.0 to 50.0
2517 Bush
16.0 to 60.0
2517 Bush
16.0 to 60.0
Material: Cast Iron Grade GG25
-> Giflex Internal Gear Couplings with Steel Sleeves Pilot Bore
UK -Tel: (44) 0121 555 6777 Fax: (44) 0121 555 6779