As an alternative to either
Boring & Keywaying a pilot
bore pulley or using a Taper
bored pulley and Bush! Why
not take a look at the range
of Locking Bushes we now
offer, as they eliminate the
need for fixing via a Keyway-Key thereby providing the addedbenefit of a uniform distribution of the drive load over the entire diameter of the bush?(Use this link to go locking bush page)
Lakehurstpt
Back to Vee & Wedge Belt Drive Index Page ->
lakehurstpt_update057011.jpg
lakehurstpt_update057010.gif
Vee - Wedge Belt Cast Iron Pulleys Taper Bored B - SPB Section to Din 2211 & ISO 4183
* Denotes: Pulley can be supplied with alternative Taper Bush size?
Information Bar -
lakehurstpt_update057009.gif
Copyright remains the property of Lakehurst Limited
Be cafeful when ordering Taper Bored Vee pulleys Design Types can vary from one manufactuer to another. So if you need a particular design pattern then please specify this when enquiring or ordering.
Most European Pulley Manufacturers & Suppliers quote the pulley size using the PCD Pitch Circle Diameters, hence to obtain the Outside Diameter for a SPB Section pulley you need to add 7.0 mm, therefore a 90.0 pcd SPB would have an outside diameter of 97.0mm.
-> Link to page showing Pulley Pattern Types
Cast Iron GG20 Taper Bored Range for B & SPB Section Belts & Belting
lakehurstpt_update057008.jpg
lakehurstpt_update057007.jpg
lakehurstpt_update057006.gif
Welcome to the Specialist Supplier & Manufacturer to the Power Transmission Drives Industry
lakehurstpt_update057005.gif
Home -
About Us -
Services -
Contact -
News -
Belt
Section
B/SPB
1 Groove
B/SPB
2 Groove
B/SPB
3 Groove
B/SPB
4 Groove
B/SPB
5 Groove
B/SPB
6 Groove
B/SPB
8 Groove
B/SPB
10 Groove 
Standard
Stock
Sizes
PCD
Dia.
in MM
90-95-100
106-112-118
125-132-140
150-160-170
180-190-200
212-224-236
250-280-300
315-400
90-95-100-106
112*-118*-125
132-140-150
160-170*-180
190-200-212
224-236-250
265-280-300
315-335*-355
375-400-450
500-560*-630
710-800
90-95-100
106-112*-118*
125-132-140
150-160-170
180-190-200
212-224-236
250-265-280
300-315-335
355-400-425
450-500-560
630-710-800
900-1000
1120-1250
100-106-112
118-125-132
140-150-160
170-180-190*
200-212-224
236-250-265
280-300*-315
335-355-375
400-450-500
560-630-710*
800-900-1000
1120-1250
100-125-132-135
140-145-150-155
160*-165-170-175
180-185-190-195
200-212-218-224*
230-236-250-265
280-300-315-335
355-375-400-425
450-475-500-560
630-710-800*-900*
1000-1120-1250
132-135-140-145
150-155-160-165
170-175-180-185
190-195-200*
206-212-218
224-230-236
250-265-280
300-315-335
355-400*-425
475-500*-560
630*-710*-800
900-1000*
1120-1250*
140-160*-170
180-190-200
212-224-236
250-280-300
315-335-355*
400-450-475
500-560-630
710-800*-900
1000-1120
1250
180-200-212
224-236-250
280-300-315
335-355-400
450-500-560
630-710*-800*
900-1000
1120-1250
-> B-SPB Cast Iron Pilot Bore
-> B-SPB Pre- Bored for Locking Bush
-> Classical Vee Belts B Section
-> Wedge Belts SPB Section
-> Taper Bushes ( Taper Lock*)
As an alternative to Boring Keywaying or using a Taper Bush, why not take a look at our range of Locking Bushes, which eliminates the need for fixing via a keyway-Key and provides uniform distribution of the load over the entire diameter?
-> Shaft Locking Bushes (Clamping)
-> Beside the Reworking Service the company offers a Full Manufacturing
Service that caters for:-
1- Any requirement outside the stock range!
2- Customers own drawing requirement.
3- When a stock Vee pulley is not suitable?
See our manufacturing Capacity
To compliment the Stock range of Products the company offers a comprehensive reworking service to modify any stock Pulley to your individual requirements?
This range of European Standard Taper Bored Cast Iron Vee Pulleys to Din 2211 & ISO 4183 are suitable for use with Wedge Belt to Din 7753 part 1, Classical Vee Belts to Din 2215 and Classical Open Ended Belting to Din 2216 and have been statically Balanced for Belt Speeds up to 35m per second.
As individual design patterns can vary from one manufacturer to another, the company has overcome this problem by bringing together a number of manufacturers design patterns and combining them into one range, enabling it to offer a choice of design formats and alternative bush size types together with a Standard Range extending up to 1250PCD x 12 Groove which is currently larger than all the leading names in the market today. Couple this with its Pilot Bore and Pre-bored Ranges for Locking Bushes means you have access to one of the Largest stock ranges in Europe, and even if you can not find what you are looking for in these Standard Stock ranges, the company also provides a full manufacturing service to your own indivdual requirement from its own UK plant as well as its European manufacturing partners.
NOISE/VIBRATION: as the standard stock range of Taper bushed Vee Pulleys have been balanced based on 50HZ then for drives operating at 60HZ or higher where noise and vibration is paramount then we can provide a re-balancing Service ask our Sales office for details?
This New feature is there to provide useful links to other pages, further information and Tips you may find of interest?
lakehurstpt_update057004.jpg
Alternative Design Types:
Reworking Service:
Manufacturing:
Tips:
Links to Related Products:
Tip: ?
Alternative Shaft Fixing Option:
lakehurstpt_update057003.jpg
lakehurstpt_update057002.jpg
lakehurstpt_update057001.jpg
-> Adjustable Motor Rails & Bases for Adusting Belt Drive Centre's
-> Automatic Tensioning Arms for Fixed Centre Drives
UK -Tel: (44) 0121 555 6777 Fax: (44) 0121 555 6779