lakehurstpt_update056011.jpg
lakehurstpt_update056010.gif
Welcome to the Specialist Supplier & Manufacturer to the Power Transmission Drives Industry
lakehurstpt_update056009.gif
Home -
About Us -
Services -
Contact -
News -
lakehurstpt_update056008.gif
lakehurstpt_update056007.gif
Cast Iron GG20 Taper Bored Range for A & SPA Section Belts & Belting
Vee - Wedge Belt Cast Iron Pulleys Taper Bored A - SPA Section to Din 2211 & ISO 4183
Back to Vee & Wedge Belt Drive Index Page ->
Lakehurstpt
Information Bar -
lakehurstpt_update056006.gif
Copyright remains the property of Lakehurst Limited
-> Link to page showing Pulley Pattern Types
Be cafeful when ordering Taper Bored Vee pulleys Design Types can vary from one manufactuer to another. So if you need a particular design pattern then please specify this when enquiring or ordering.
Most European Pulley Manufacturers & Suppliers quote the pulley size using the PCD Pitch Circle Diameters, hence to obtain the Outside Diameter for a SPA section pulley you need to add 5.6 mm, therefore a 63.0 pcd SPA would have an outside diameter of 68.6mm.
lakehurstpt_update056005.jpg
-> A-SPA Cast Iron Pilot Bore
-> A-SPA Pre-Bored for Locking Bush
-> Classical Vee Belts A Section
-> Wedge Belts SPA Section
Belt
Section
A/SPA
1 Groove
A/SPA
2 Groove
A/SPA
3 Groove
A/SPA
4 Groove
A/SPA
5 Groove
 A/SPA
6 Groove
Standard
Stock
Sizes
PCD
Dia.
in MM
63*-67-71
75-80-85
90-95-100
106-112-118
125-132-140
150-160-170
180-190*-200
212-224-236
250-280-300
315-400-450
500-630
63*-67-71
75-80-85
90-95-100
106-112-118
125-132-140
150-160-170
180-190*-200
212-224-236
250-280-300
315-400-450
500-560-630
900-
71-75-80
85-90-95
100-106-112
118-125-132
140-150-160
170-180-190
200-212-224
236-250-280
300-315-335
355-400-450
500-560-630
800-900-1000
80-90-95
100-106-112
118-125-132
140-150-160
170-180-190*
200-212-224
236-250-280
300-315-335
355-400-450
500-560-630
800-900-1000
95-100-106
112-118-125
132-140-150
160-170*-180
190-200-212
224-236-250
280-300-315
335-355-400
450-500-560
630-800-900
1000
100*-106-112
118-125-132
140-150-160
170-180-190*
200*-212*-224*
236*-250*-280
300-315-355
400-450-500
560*-630-800
1000
* Denotes: Pulley can be supplied with alternative Taper Bush size?
-> Taper Bushes (Taper Lock*)
As an alternative to Boring Keywaying or using a Taper Bush, why not take a look at the range of Locking Bushes, which eliminates the need for fixing via a keyway-Key and provides uniform distribution of the load over the entire diameter?
This range of European Standard Taper Bored Cast Iron Vee Pulleys to Din 2211 & ISO 4183 are suitable for use with Wedge Belt to Din 7753 part 1, Classical Vee Belts to Din 2215 and Classical Open Ended Belting to Din 2216 and have been statically Balanced for Belt Speeds up to 35m per second.
As individual design patterns can vary from one manufacturer to another, the company has overcome this problem by bringing together a number of manufacturers design patterns and combining them into one range, enabling it to offer a choice of design formats and alternative bush size types together with a Standard Range extending up to 1250PCD x 12 Groove which is currently larger than all the leading names in the market today. Couple this with its Pilot Bore and Pre-bored Ranges for Locking Bushes means you have access to one of the Largest stock ranges in Europe, and even if you can not find what you are looking for in these Standard Stock ranges, the company also provides a full manufacturing service to your own indivdual requirement from its own UK plant as well as its European manufacturing partners.
To compliment the Stock range of Products the company offers a comprehensive reworking service to modify any stock Pulley to your individual requirements?
-> Beside the Reworking Service the company offers a Full Manufacturing
Service that caters for:-
1- Any requirement outside the stock range!
2- Customers own drawing requirement.
3- When a stock Vee pulley is not suitable?
See our manufacturing Capacity
NOISE/VIBRATION: as the standard stock range of Taper bushed Vee Pulleys have been balanced based on 50HZ then for drives operating at 60HZ or higher where noise and vibration is paramount then we can provide a re-balancing Service ask our Sales office for details?
This New feature is there to provide useful links to other pages, further information and Tips you may find of interest?
-> Shaft Locking Bushes (Clamping)
lakehurstpt_update056004.jpg
Links to Related Products:
Tips:
Manufacturing:
Reworking Service:
Alternative Design Types:
Tip: ?
Alternative Shaft Fixing Option:
As an alternative to either Boring & Keywaying a pilot bore pulley or using a Taper bored pulley and Bush! Why not take a look at the range of Locking Bushes we now offer, as they eliminate the need for fixing via a Keyway-Key thereby providing the added benefit of a uniform distribution of the drive load over the entire diameter of the bush?(Use this link to go locking bush page)
lakehurstpt_update056003.jpg
lakehurstpt_update056002.jpg
lakehurstpt_update056001.jpg
-> Adjustable Motor Rails & Bases for Adusting Belt Drive Centre's
-> Automatic Tensioning Arms for Fixed Centre Drives
UK -Tel: (44) 0121 555 6777 Fax: (44) 0121 555 6779