Lakehurstpt
Manufacturing Capacity: Vee/Wedge Belt Drive Pulleys
Welcome to the Specialist Supplier & Manufacturer to the Power Transmission Drives Industry
Copyright remains the property of Lakehurst Limited
Originally the Companys UK Manufacturing Service had been developed to supplement its European Stock Range of Vee/Wedge Belt Pulleys and to service the UK demand for replacement pulleys to the RMA Standard 8V and the Classical D & E Sections, and finally pulleys to customer own individual design requirements.
However in the past five years since the introduction of the Pilot Bore range of European Standard Cast Iron Vee & Wedge Pulleys and the New Ranges of Poly Vee and Crowned Flat Belt Pulleys for Taper Bushes we have seen an increase in demand for pulleys of all types above its existing UK capacity of 1000mm in diameter.
In Response the company has increased it's overall manufacturing capacity up to 1800mm diameter and up to 16 groove as Finished Bored and Keywayed and or Taper Bushed for shaft sizes up to and including 160mm via one of our European Manufacturing partners.
So needless to say we would welcome the opportunity to quote for any none stock pulley to any customers individual drawing requirements.
We can manufacture any type of Vee Belt Pulley to suit any of the following Sections of belts:-
Belt
Section |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
Z/SPZ |
16 |
28 |
40 |
52 |
64 |
76 |
88 |
100 |
112 |
124 |
136 |
148 |
160 |
172 |
184 |
196 |
A/SPA |
20 |
35 |
50 |
65 |
80 |
95 |
110 |
125 |
140 |
155 |
170 |
185 |
200 |
215 |
230 |
245 |
B/SPB |
25 |
44 |
63 |
82 |
101 |
120 |
139 |
158 |
177 |
196 |
215 |
234 |
253 |
272 |
291 |
310 |
C/SPC |
34 |
59.5 |
85 |
110.5 |
136 |
161.5 |
187 |
212.5 |
238 |
264.5 |
289 |
314.5 |
340 |
365.5 |
391 |
416.5 |
D |
51 |
88 |
125 |
163 |
200 |
238 |
275 |
312 |
350 |
386 |
424 |
461 |
498 |
538 |
575 |
612 |
E |
58 |
102.5 |
147 |
191.5 |
236 |
280.5 |
325 |
369.5 |
414 |
458.5 |
503 |
547.5 |
592 |
636.5 |
681 |
725.5 |
3V |
18 |
28.3 |
38.6 |
48.9 |
59.2 |
69.5 |
79.8 |
90.1 |
100.4 |
110.7 |
121 |
131.3 |
141.6 |
151.9 |
162.2 |
172.5 |
5V |
26 |
43.5 |
61 |
78.5 |
96 |
113.5 |
131 |
148.5 |
166 |
183.5 |
201 |
218.5 |
236 |
253.5 |
271 |
288.5 |
8V |
38 |
66.6 |
95.2 |
123.8 |
152.4 |
181 |
209.6 |
238.2 |
266.8 |
295.4 |
324 |
352.6 |
381.2 |
409.8 |
438.4 |
467 |
Groove Width Chart:
Z/SPZ |
A/SPA |
B/SPB |
C/SPC |
D |
E |
3V |
5V |
8V |
PCD+4mm |
PCD+5.6mm |
PCD+7mm |
PCD+9.6mm |
PCD+16.2mm |
PCD+19.2mm |
PCD+1.2mm |
PCD+2.6mm |
PCD+5mm |
Differences between Pulley Outside Diameter to Pitch Circle Diameter:
Classical Vee Belts: Z-A-B-C-D & E Sections
to ISO4184-BS3790-DIN2215-RMA IP20
Wedge Belts: SPZ-SPA-SPC-3V-5V-8V Sections
to ISO4184-BS3790-DIN7753-RMA IP22
For ease of clarification we have provided a list of common pattern types of Pilot bore and Taper bored pulleys, please refer to this page if you require a particular pattern type?
Material: Cast Iron - Mild Steel or Aluminum
Our UK Manufacturing Plant: Specialising in small volume work on fast lead times and beside the above mention sections they can quote for any other Belt Section?
European Manufacturing Plant: Geared for Large Volume Repeat business to any customer's indivdual design specification. please do contact us with your requirements?
Vee Belts: Polyflex & Polyflex JB 3M-5M-7M-11M Sections
Poly Vee Belts: H, J, PK, L & M Sections
Along side this manufacturing service, the company also provides a full Reworking Service of its own stock pulleys, and in some cases will offer you this as a cheaper alternative to manufacturing if it is felt that modifying a stock product would go a long way to acheiving your design criteria!
Modifying a Stock Product as Cheaper Alternative to Manufacture: