Welcome to the Specialist Supplier & Manufacturer to the Power Transmission Drives Industry
Copyright remains the property of Lakehurst Limited
Information Bar -
Double Pitch Carbon Steel Roller Chains
Double Pitch Carbon Steel Roller Chains To ISO606R- ANSI B 29.1/Din 8188 stds -
These Series of Chains are made using the same components of its shorter relatives except the pitch size has been doubled?
Example: 208A(A2040) Chain has the same Pin, Bush, & Roller as 08A (40-1) with the only difference being that the side plate length and been increased so as to double the pitch to 1"
Unlike its British Equivalent, the American series have been extensively developed to suit all types of applications and are available with both Waisted and Straight side plates with other options that include: Holes in Side Plates at Mid pitch, Large Rollers in Carbon Steel as well as Delrin with or without Outboard Rollers, Hollow Pins, Increase Capacity through Thicker Side Plates, Accumlator Types, K1, K2, M1, M2 Attachments, Extended Pins - Plain, D3,Threaded. With most if not all being available in Standard Carbon Steel - Nickel Plated - Zinc Plated and Stainless Steel?
Only listed here are the base designations for these chains, although there is a number of prefixes that designate the different types! (For a full listing please use the company's Product Search Service, see below).
Std Box length: 5meters, 10Ft
Cut lengths: to order
Connecting Links: Both Spring Clip type & Cotter Pin type dependent on Pitch Size?
Offset/Crank Link: Single Pitch type only!
Attachment Links; K1, K2, M1, M2!
Extended Pins: Plain , Cotter Pin, Circlip, D3 & threaded!
Hole in Side Plate:?
Precision Roller Chains: as the company offer a combined range, that is produced by a number manufacturers from around the World, they have adopted the following Quality Standards:-
1- All chains have been produced in plant that is Certified to ISO 9001
2- Chains covered by the ISO 606R Standard, will conform to this Standard of Specification and Quality
3- For chains not covered by ISO606R, then we have adopted the appropriate Din 8187 or Din 8188 or Ansi B 29.1 of Specification and Quality Standard.
4- Work standard chains not covered by the above standards will conform to the appropriate Manufacturer's Standard.
Be Careful when replacing drive wheel for these chains, as well as drive wheel cut to the correct Pitch Size. It is also possible to use the Shorter Pitch Standard Ansi sprockets and be driving off every other Tooth as listed opposite. We would strongly recommend that you obtain the Outside Diameter and number of teeth to confirm which type is fitted.?
This New feature is there to provide useful links to other pages, further information and Tips you may find of interest?
Links to Related Products:
Parts & Tools: