Welcome to the Specialist Supplier & Manufacturer to the Power Transmission Drives Industry
Home -
About Us -
Services -
Contact -
News -
Copyright remains the property of Lakehurst Limited
Back to Chains Drives Index Page -

1/2"  08B-1GL 
5/8" 10B-1GL
3/4" 12B-1GL 
1" 16B-1GL
1-1/4" 20B-1GL
1-1/2"  24B-1GL
Simplex or
Single Strand

1/2" 08B-2GL 
5/8"  10B-2GL
3/4" 12B-2GL 
 1" 16B-2GL 
1-1/4"  20B-2GL
Duplex or
Two Strand
Straight Side Plate Carbon Steel to Din 8187
Note: 16B-1GL is available with various Side Plate Heights the Standard being 21mm but also with 23mm & 24mm Heights!
Information Bar -
Std Box length: 5meters
Cut lengths: to order
Connecting Link: Spring Clip type up to 1" with 1-/4" & 1-1/2" being Cotter Pin type
Offset/Crank Link: Single pitch type only
 Extended Pins:
Serrated Side Plates:
Specials Subject to Min Qty:
You can use the Normal Single offset/crank for these chains as all of our single Crank links have straight Side plates!
This New feature is there to provide useful links to other pages, further information and Tips you may find of interest?
Chain Breakers: 3/8" to 3/4" & 3/4" to 1-1/4"
Other Applications:
Materials Handling- Pallet Lifts & Conveyors
Industries- Timber & Brick
This Series of Chains derive from the standard series of short Pitch Roller Chains and conform to chains produced to the ISO 606R and DIN 8187 standard except the inner and outer plates have Straight Sides as shown in the picture opposite, rather than the normal waisted or figure of eight profiles. They are used in the Materials Handing industry to conveyor components utilizing the Straight side plates and are extensively used in the Brick Industry.
Further alternatives have been specifically developed for application within the Timber Industry which have a serration on one side of the plates. As the size of these serrations (Pitch ,Height and number) can vary from brand to brand, therefore if you are interested in any of these chains please contact our Sales Department with your requirement ?
Timber Industry:-
Precision Roller Chains: as the company offer a combined range, that is produced by a number manufacturers from Europe and Japan, they have adopted the following Quality Standards:-
1- All chains have been produced in plant that is Certified to ISO 9001
2- Chains covered by the ISO 606R Standard, will conform to this Standard of Specification and Quality
3- For chains not covered by ISO606R, then we have adopted the appropriate Din 8187 or Din 8188 or Ansi B 29.1 of Specification and Quality Standard.
4- Work standard chains not covered by the above standards will conform to the appropriate Manufacturer's Standard.
Only listed here are the base designations of the most popular pitch sizes and types, (If you are looking for a chain which is not listed here please use the company's Product Search Service below)
-> Product Search Service: If you have a manufacturer chain reference that is not listed here, then please do ask our sales dept. to search its Cross Reference Database?
(Use this link to email us)
As the only difference in these series of chains is that the side plate have straight side then you would use the Standard BS Series of sprockets and plate wheels to drive them!
-> Simplex Pilot Bore Sprockets
-> Shaft Ready Simplex Sprockets
-> Duplex Pilot Bore Sprockets
-> Simplex Pilot Bore Plate wheels
-> Duplex Pilot Bore Plate wheels
-> Simplex Pilot Bore/Taper bored with Induction Harden teeth sprockets
-> Simplex/Duplex Taper Bored Sprockets
Supply Size:
Parts & Tools:
Alternative Materials:
Sourcing Service:
Links to Related Products:
->PE-UHMW WearStripsGuides -RollerChains